IBC Valves
Upgrade your intermediate bulk container dispensing safety and liquid control. Qiming Packaging manufactures factory-direct replacement IBC valves, available in DN50 (2-inch S60x6) and DN80 (3-inch) configurations in both Butterfly and Ball valve designs. Every single valve is 100% nitrogen pressure leak-tested for zero leakage with hazardous chemicals, acids, agricultural liquids, and food products.
✓ 100% Factory Nitrogen Underwater Pressure Leak-Tested
✓ Chemical-Resistant Pure PTFE / EPDM / Viton Sealing Gaskets
✓ Direct Fit for Schütz, Mauser, Sotralentz & Greif IBC Totes
✓ Flexible MOQ & Trial Orders Available with Rapid Global Shipping
Qiming Packaging IBC valves primarily come in two types: ball valves and butterfly valves. These valves are made from high-density polyethylene (HDPE) and feature a 2-inch NPT male outlet and a 2-inch female metal collar inlet. Each valve includes an EPDM gasket and a tamper-evident foil seal over the 2-inch NPT outlet, along with a dust cap to protect against particles and contaminants when the foil seal is broken or during storage. The valves are equipped with a large, easy-to-operate handle for simple opening and closing.
We offer various sizes for tank valves, including 62 mm (DN 40), 75 mm (DN 50), and 100 mm (DN 80). In addition to our comprehensive selection of IBC valves, Qiming Packaging also provides IBC tote caps and adapters. If you cannot find the ideal product on this page, please contact our support team for further assistance and personalized recommendations.
| Valve Model | Nominal Size | Inlet Nut / Collar | Outlet Thread Spec | Mechanism & Seal | Working Temp |
|---|---|---|---|---|---|
| QM-BF-50 (Butterfly) | DN50 (2" / 50 mm) | 62 mm / 75 mm Aluminum Nut | S60x6 Coarse Male | Flapper Disk with EPDM Gasket | -20°C to +70°C |
| QM-BV-50 (Ball Valve) | DN50 (2" / 50 mm) | 62 mm / 75 mm Collar Ring | S60x6 Coarse Male | Full Pure PTFE Chemical Seat | -20°C to +80°C |
| QM-BF-80 (Heavy Flow) | DN80 (3" / 80 mm) | 100 mm Heavy Collar | S100x8 Coarse Thread | High-Flow Butterfly / Viton | -20°C to +70°C |
| QM-BV-CAM (Quick Connect) | DN50 (2" / 50 mm) | S60x6 Female Thread | 2" Male Camlock Adapter | Integrated Ball / PTFE | -15°C to +75°C |
For more details, please contact us. We can send you comprehensive valve specifications and a catalog.Or send an email directly packaging@qimingpackaging.com
A: Every single IBC valve undergoes an automated 0.2 MPa underwater nitrogen air-tightness test on our factory assembly line prior to final packing. We ensure zero bubbles and zero pressure drops under rigorous quality control.
A: Butterfly valves are lightweight, cost-effective, and ideal for standard water and low-viscosity fluids. Ball valves feature a full-bore spherical flow channel with 100% pure PTFE sealing seats, making them ideal for high-viscosity resins, paints, and aggressive chemical solvents.
A: Yes, each valve includes a pre-installed aluminum induction foil seal over the outlet, a heavy-duty screw-on dust cap, and a security latch on the operating handle to ensure tamper evidence and dust protection during storage.
A: We offer Flexible MOQ & Trial Orders. Standard packaging is 50 pcs per export carton (carton size: 60x40x35cm, approx 18kg), palletized and shrink-wrapped for secure container shipping.
A: Yes, we provide free sample ball and butterfly valves (DN50 62mm/75mm or DN80 100mm) for thread fit and torque testing. Contact packaging@qimingpackaging.com to request sample units.
Contact Qiming Packaging engineering and export department for 2-hour rapid response: